Size Guides

The following size charts & guides are for sizing reference only and not an indication of the sizes we stock. For stock enquiries, please refer to the specific product page to see what is available or contact our customer services team.

Depending on the country you are in/ have selected through the country selector, the following size scales are displayed in the size drop-down on the product page:
United Kingdom: UK size
All other European countries (excl. UK): EU size

For best results when interpreting the size guides on mobile, please rotate your phone.

footwear
INTERNATIONAL SIZING EQUIVALENTS+

 

WOMENS TALL BOOTS+

TALL BOOTS MEASUREMENT GUIDE

 how-to-measure   
  • Sit in a straight chair with your knees bent at 90 degrees to the floor.
  • Wear the breeches and socks that you would most likely wear with your tall boots.
  • Have someone else measure your calves, if possible:

A. Measure foot for shoe size.
B. To determine calf width: Measure the calf width at the widest part of the calf.
C. To determine calf height: Measure leg height from the floor to the bend behind the knee.

  • Add approximately ½”–¾” to allow for drop.
  • Approximate drop allowance is built into the chart height measurements so make sure you add drop to your leg measurement.                           

WOMEN'S TALL BOOT SIZE CHART I

womens-tall-boot-size-chart-1

WOMEN'S TALL BOOT SIZE CHART II

womens-nitro-max-size-chart-2

WOMEN'S TALL BOOT SIZE CHART III

womens-tall-boot-size-chart-2

WOMEN'S TALL BOOT SIZE CHART IV

womens-tall-boot-size-chart-3

WOMEN'S TALL BOOT SIZE CHART V

ellipseII-size-chart

WOMEN'S TALL BOOT SIZE CHART VI

womens-tall-boot-size-chart-4

WOMEN'S TALL BOOT SIZE CHART VII

capriole-size-chart

MENS TALL BOOTS+

TALL BOOTS MEASUREMENT GUIDE

 how-to-measure   
  • Sit in a straight chair with your knees bent at 90 degrees to the floor.
  • Wear the breeches and socks that you would most likely wear with your tall boots.
  • Have someone else measure your calves, if possible:

A. Measure foot for shoe size.
B. To determine calf width: Measure the calf width at the widest part of the calf.
C. To determine calf height: Measure leg height from the floor to the bend behind the knee.

  • Add approximately ½”–¾” to allow for drop.
  • Approximate drop allowance is built into the chart height measurements so make sure you add drop to your leg measurement.                           

MEN'S TALL BOOT SIZE CHART I

Mens_Tall_Boot_Size_Chart

MEN'S TALL BOOT SIZE CHART II

mens-nitro-max-size-chart

KIDS TALL BOOTS+

TALL BOOTS MEASUREMENT GUIDE

 how-to-measure   
  • Sit in a straight chair with your knees bent at 90 degrees to the floor.
  • Wear the breeches and socks that you would most likely wear with your tall boots.
  • Have someone else measure your calves, if possible:

A. Measure foot for shoe size.
B. To determine calf width: Measure the calf width at the widest part of the calf.
C. To determine calf height: Measure leg height from the floor to the bend behind the knee.

  • Add approximately ½”–¾” to allow for drop.
  • Approximate drop allowance is built into the chart height measurements so make sure you add drop to your leg measurement.                           
Kids_Tall_Boot_Size_Chart
CHAPS+

HALF CHAPS MEASUREMENT GUIDE

 how-to-measure   
  • Sit in a straight chair with your knees bent at 90 degrees to the floor.
  • Wear the breeches and socks that you would most likely wear with your half chaps.
  • Have someone else measure your calves, if possible:

A. To determine calf width: Measure the calf width at the widest part of the calf.
B. To determine calf height: Measure leg height from the floor to the bend behind the knee.

  • On initial fitting, chaps should fit snug and will give over time. Depending on materials and construction, fit may vary slightly across styles.

WOMEN & MEN HALF CHAPS SIZE CHART

KIDS HALF CHAPS SIZE CHART

CLOTHING
INTERNATIONAL SIZING EQUIVALENTS+
dress size equivalents
 
WOMENS DENIM+
 
MENS DENIM+
 
WOMENS BREECHES & SHOW JACKETS+

MEASUREMENT GUIDE: 

CHEST Measure around the shoulder blades, under the armpits and over the fullest part of the bust.

SLEEVE Bend your arm 90 degrees and put your hand on your hip. Hold the tape measure at the center back of your neck and measure across your shoulder to your elbow, and then down to your wrist.

LONG & TALL LENGTHS Sleeve lengths are 1” longer and body lengths are 1½” longer than regular sizing.

WAIST Find your natural waistline and measure.

HIP Measure the fullest part of the hip, usually 7-9 inches below the waist.

BREECHES Ariat® breeches are designed to fit a few inches above your ankle bone for comfort. Inseams measure at 25.5” for Regular and 27.5” for Long.

MENS BREECHES & SHOW JACKETS+

MEASUREMENT GUIDE: 

CHEST Measure around the shoulder blades, under the armpits and over the fullest part of the bust.

SLEEVE Bend your arm 90 degrees and put your hand on your hip. Hold the tape measure at the center back of your neck and measure across your shoulder to your elbow, and then down to your wrist.

LONG & TALL LENGTHS Sleeve lengths are 1” longer and body lengths are 1½” longer than regular sizing.

WAIST Find your natural waistline and measure.

HIP Measure the fullest part of the hip, usually 7-9 inches below the waist.

BREECHES Ariat® breeches are designed to fit a few inches above your ankle bone for comfort. Inseams measure at 26” for Regular and 28” for Long.

KIDS+
 
ACCESSORIES
FACE MASKS+
Face masks

MEASUREMENT ADVISE: 

Measure from in front of one of your ears, across the highest point of your nose, to in front of your other ear to get your mask measurement.

S/M should fit those measuring 10 – 11 ½ inches

L/XL should fit those measuring 11 ¾ inches or more

DOG COATS+

MEASUREMENT ADVISE: 

Please make sure to measure your pet for the best possible fit. If your pet measures between two sizes, we advise ordering the larger of the two.

GLOVES+

GLOVE MEASUREMENT GUIDE

 how-to-measure   
  • Open your hand and place a tape measure around your base knuckles (do not include the thumb). Now make a loose fist and measure the circumference:
  • If you do not have a tape measure at your disposal, you can use a thread to take the measurement and then determine the length of the thread using a ruler.